HP Z240 Small Form Factor Maintenance And Service Manual Download Page 15

Page: 15 / 106

System board components

The following illustration and table identify the system board components for the SFF workstation.

I/O

SATA

Power

Dual-Mode DisplayPort

USB 3.1 (option)

Battery

DisplayPort

SATA

Processor power

Front audio

AHCI 6Gb/s

Front power button/LED

Front speaker

PCI/PCIe

Main power

Front USB 2.0

PCIe3 x16

Power COMM

Front USB 3.0

PCIe3 x1

SATA power

Internal USB 2.0

PCIe3 x1

Security

Internal USB 3.0

PCIe3 x16 (4)

Chassis solenoid lock

Keyboard / mouse

Z turbo drive LED (E19)

Hood sensor

Network / rear USB 3.0

NOTE:

For related expansion card

slot information, see

Expansion slots

on page 47

Service

Thunderbolt (option)

M.2

Clear CMOS button

Rear audio

PCIe3 x4

ME/AMT flash override

Rear USB 3.0

Cooling

Password jumper

Serial

Processor fan

Serial (option)

Rear fan

HP Z240 SFF Workstation components

Summary of Contents for Z240 Small Form Factor











































































































Search results

Summary of Contents for Z240 Small Form Factor

Reviews:

Related manuals for Z240 Small Form Factor

Brands by name

Popular brands

HP Z240 Small Form Factor, Maintenance And Service Manual

Search results

Summary of Contents for Z240 Small Form Factor

Reviews:

Related manuals for Z240 Small Form Factor

Brands by name

Popular brands