HP Workstation x4000, Accessory Installation Manual

Page: 46 / 54

Installing Accessories
CD-RW or DVD
Chapter 2 44
NOTE If you installed a CD-RW, you must install the software that came with
the drive before you can write to the device.
The CD-ROM driver is pre-loaded and is used by the CD-ROM, CD-RW,
and DVD to read standard CD-ROM format media.
Load the Software Applications for Your CD-RW
If you have a CD-RW in your Workstation, you must install both the
Direct CD and Easy CD Creator applications located on the Applications
CD-ROM before you can use the write/re-write functionality of the drive.
To install these applications:
1. Put the Applications CD-ROM in your CD-RW drive. Installation
begins automatically.
2. When the installation window appears, a dialog box appears asking
you to select your language. Select the language you wish to install.
3. Select one of these choices and follow the on-screen directions for
installation:
•
Easy CD Creator
•
Direct CD
4. When the installation wizard returns, you must restart your system
before installation is complete. To restart your system:
a. Select
Exit
.
b. Remove the Applications CD-ROM and click
Yes
to restart your
system.
NOTE Repeat these instructions to install the second application. You must
restart your system between each installation in order for both
applications to install correctly.
If you do not install either Easy CD Creator and Direct CD, you can only
use the CD-RW drive’s read functionality.
This manual downloaded from http://www.manualowl.com