34
Using the BIOS Setup Utility
Chapter 3
continues to attempt to boot despite any start-up error messages that are
displayed. Note that this field only affects those errors that are configured
at build-time to halt the system. The default is
Enabled
.
Summary Screen:
This field is used to enable or disable a summary of the system
configuration, which is displayed before the operating system starts to load.
To speed up booting, disable the Summary Screen. The default is
Enabled
.
Keyboard Features
Sub-Menu
This sub-menu, which is accessed from the Numlock: field in the Main
BIOS Setup Menu, enables or disables various keyboard features. The
Keyboard Features Sub-Menu is shown below.
Numlock:
This field enables or disables the Numlock feature of the keyboard at boot
time. When enabled, Numlock permits the use of the keypad numbers on
the keyboard. The default is
Off
, which disables the Numlock key at boot
time.
Key Click:
This field enables or disables the key click feature on the keyboard. When
enabled, the system produces an audible click each time a key is pressed.
The default is
Disabled
.
Keyboard auto-repeat rate:
This field sets the auto-repeat rate when a key is held down on the keyboard.
The rates range from 2-30 per second. The default rate is
30/sec
.
Keyboard auto-repeat
delay:
This field sets the delay between when a key is pressed and when the
auto-repeat feature begins. Options are
1/4
,
1/2
,
3/4
, and
1
(one) second.
The default delay is
1/4 sec
.
PhoenixBIOS Setup - Copyright 1985-95 Phoenix Technologies Ltd.
Main
Keyboard Features
Item Specific Help
Numlock;
[Off]
<Tab>, <Shift-Tab>, or
<Enter> selects field.
Key Click:
[Disabled]
Keyboard auto-repeat rate:
[30/sec]
Keyboard auto-repeat delay:
[1/4 sec]
F1 Help
↑ ↓
Select Item
-/+ Change Values
F9 Setup Defaults
ESC Exit
← →
Select Menu
Enter Select > Sub-Menu F10 Previous Values
Figure 3-6. Keyboard Features Sub-Menu
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
