HP VMA Series, Installation And Service Manual

Page: 76 / 300

Chapter 5 - Operating the System via the CLI
76
VMA-series Memory Array Installation and Service Guide HP-AM456-9002A Rev 01
Connecting to the CLI
Connect to the Memory Array’s CLI via SSH or Telnet on the host computer over
the Ethernet interface.
You can also log into the system via the serial port. See Logging into the CLI via
the Serial Interface on page 59 for instructions.
To connect to the Memory Array from a Windows machine, see Logging in via a
Windows host computer on page 59.
Note:
The default command line editor for the admin user is
Emacs
. You can
change the default editor to vi , see Setting the Command Line Editor on page 80.
Connecting via SSH
Connect to the CLI via SSH through your host computer.
On a Linux host, use your preferred command shell. On a Windows host, use a
GUI application, such as PuTTY, to SSH to the Memory Array.
The following is an example of what you will see after successfully connecting to
the CLI.
Connecting via Telnet
Connect to the CLI via a Telnet session on your host computer.
**************************************************************************
* OAM-CLI *
* *
* Operations, Administration & Maintenance - Command Line Interface *
* *
* Copyright (c) 2006-2010, Violin Memory, Inc. All Rights Reserved. *
* *
* S/W Build Info:
Date
17:15:13 *
* swbuild.violintech.net by user common *
* *
* Release = Release 3.4 *
* *
**************************************************************************
You are at the root node.
>