HP VMA Series Installation And Service Manual Download Page 133

Page: 133 / 300

Configuring Partitions and Storage Devices

HP-AM456-9002A Rev 01

VMA-series Memory Array Installation and Service Guide

133

To unmount the file system, at the command prompt, type:

Enabling Host to Automatically Mount
Partitions

By editing the

/etc/fstab

file, you can enable the host computer to

automatically mount Memory Array partitions on boot up.

Log into the host computer as

root

and change directories into

/etc

Edit the

/etc/fstab

file with the desired text editing tool.

Add the following row to the file, changing the values to appropriate ones for
your system:

Where:

umount /mnt/strad

/dev/<partition> /mnt/<mount_pth> <fs_type> <mount_opt>

<dump_opt> <fsck_opt>

/dev/<partition>

Specifies the partition name.

/mnt/<mount_pth>

Specifies the default mount path.

<fs_type>

Specifies the file system type of the device.

<mount_opt>

Specifies the mount options, which are
separated by commas, for the file system.
The available options are:

auto | noauto

—Specifies whether to

automatically mount the device or not. With

noauto

, the device can only be mounted

explicitly.

user | nouser

—Specifies whether a

typical user versus the “root” user can mount
the device.

exec | noexec

—Specifies that the binaries

contained on the partition can or cannot be
executed. Not recommended for a root
partition.

—Mounts the device read-only.

—Mounts the device read-write.

sync | async

—Specifies how input and

output is performed by the device. For
example, a command is executed at the same
time it has been issued.

defaults

—Specifies to use the default

options, which are:

suid

dev

exec

auto

nouser

async.

Summary of Contents for VMA Series













































































































































































































































































































Search results

Summary of Contents for VMA Series

Reviews:

Brands by name

Popular brands

HP VMA Series, Installation And Service Manual

Search results

Summary of Contents for VMA Series

Reviews:

Brands by name

Popular brands