HP VMA Series, Installation And Service Manual

Page: 230 / 300

Appendix D - CLI Reference
230
VMA-series Memory Array Installation and Service Guide HP-AM456-9002A Rev 01
VIMM Context Commands
Figure D.5 Chassis>Board0>Slot >VIMM Context Commands
The table below describes the commands available at the VIMM context level of
the CLI. Specify the VIMM number when moving into the Slot context level. See
context slot
on page 223.
set admin-state
Sets the administrative state of the VIMM. When you change the state to
down
,
you turn off power to the specific VIMM so it can be removed without electrical
damage to the VIMM, the slot in which it is located, or the main board. The LED
on the main board that is associated with the slot is then lit solid red to indicate
that the VIMM can be removed safely. The LED turns off when the VIMM is
removed.
Syntax
set admin-state {down | up}
Where:
Table D.5 VIMM Context Commands
Command Description
set admin-state
Sets the administrative state of the VIMM.
show
Displays various VIMM information.
down
Turns off power at the VIMM’s slot.
up
Turns on power at the VIMM’s slot and configures the VIMM
as a spare.