HP VMA SAN, Installation And Configuration Manual

Page: 30 / 83

30 HP VMA SAN Gateway Installation and Configuration Guide AM456-9025A
Saving a Configuration
You can save configuration parameters to persistent storage in the active configuration file from the
CLI using the configuration write command, as shown in the following example.
Note:
It is recommended that you save the current configuration before making any modifications to
the configuration. This provides a backup configuration file, in case you want to revert to previous
settings.
Modifying an Existing Configuration
After the initial configuration parameters are set, you can modify and manage the configuration
through the Web Interface or the command line interface (CLI).
Note:
The VMA Gateway Web Interface provides a subset of the commands available in the CLI.
However, it is recommended that you use the VMA Gateway Web Interface for ease of use.
Supported Web Browsers
This section provides information on the VMA Gateway Web Interface requirements for browsers,
display resolution, Adobe Flash Player, JavaScript, and cookies.
The following table lists the supported browsers and versions for the VMA Gateway Web Interface.
Note:
For Windows Internet Explorer, Compatibility Mode should be turned OFF.
gateway02 [cluster1: master] (config) # configuration write
Operating System Supported Browsers
Linux Mozilla Firefox 4 and above
Google Chrome 11 and above
Windows Windows Internet Explorer 9 and above
Mozilla Firefox 4 and above
Google Chrome 11 and above
Table 2.3 Supported Web Browsers