HP VMA SAN, Installation And Configuration Manual

Page: 23 / 83

AM456-9025A HP VMA SAN Gateway Installation and Configuration Guide 23
Configuring Nodes with the Setup Wizard
This section demonstrates how to use the setup wizard to configure every HP VMA SAN Gateway
in a cluster, and covers the following topics:
•
Prerequisite on page 21
•
Logging in to the SAN Gateway on page 22
•
How to Get Help During the Configuration on page 23
•
Configuring a HP VMA SAN Gateway Master/Standalone Node on page 23
•
Configuring a Secondary HP VMA SAN Gateway Node on page 27
Caution:
If you are planning a High Availability (HA) redundant pair installation, follow the requirements and
procedures described in the Redundant Gateway Pairing Process guide at http://www.hp.com/go/vma-docs.
Prerequisite
When you connect to the public interface, you are automatically prompted to log in.
Note:
The admin user does not have a default password.
Global default gateway Enable or disable. The Global Default Gateway is set and used for
the cluster. It is recommended that you enable the global default
gateway.
DNS server name(s) Specify a primary and, optionally, a secondary DNS server.
DNS Domain name The name of your local domain.
Hostname A local hostname for the HP VMA SAN Gateway.
Admin password Setting a password is highly recommended.
Timezone Set the clock timezone by specifying the zone and subzones. (Use
"?" to display zone names interactively.)
NTP server Optional and recommended.
Email notification
recipients, mail hub, & port Set recipients to
callhome-hp@vmem.com
for VMA Customer
Support and at least one email alias for your company, in a
comma-separated list.
Enable VMA support Set autosupport to
yes
to ensure proper handling of support
issues.