HP VMA SAN, Installation And Configuration Manual, Page: 28 / 83

28 HP VMA SAN Gateway Installation and Configuration Guide AM456-9025A
The configuration wizard displays the HP VMA SAN Gateway cluster settings, as shown in the
following example, then exits to the CLI.
6.
To return to the configuration wizard after exiting, enter the command
configuration
jump-start
in the CLI.
Caution:
The
configuration jump-start
command should only be used during the initial
installation of a specific gateway.
You have entered the following information:
1. Configure as master/stand-alone: yes
2. Public interface name: eth1
3. Public interface IP address: 10.1.14.200
4. Public interface netmask: 255.255.252.0
5. Global default gateway: 10.1.12.1
6. DNS server name(s): 10.1.12.5
7. Domain name: my.storageco.int
8. Hostname: my-gateway1
9. Set clock timezone: yes
10. Zone to use: America
11. Sub-zone 1 to use: North
12. Sub-zone 2 to use: United_States
13. Sub-zone 3 to use: Pacific
14. NTP server name(s): 10.1.1.5,10.1.12.5
15. Email Notification recipient(s): admin@mystorageco.com
16. Email mailhub: 10.1.6.20
17. Email mailhub port: 25
18. Enable Violin support: yes
19. Admin password (Enter to leave unchanged): (unchanged)
20. Cluster interface name: eth1
21. Cluster expected nodes: 1
22. Cluster id: 99999-9999-1107
23. Cluster name: gateway-cluster1
24. Cluster mgmt IP address and masklen: 0.0.0.0
To change an answer, enter the step number to return to.
Otherwise hit <enter> to save changes and exit.
Choice: █
Configuration changes saved.