HP Visualize J5000, Owner'S Manual

Page: 109 / 273

5-10
A terminal window opens.
3.
Move the mouse cursor into the terminal window and click the
left mouse button.
4.
Use the cd command to change to the directory you want the
files to reside in:
cd directory_path
Enter
where directory_path is the pathname of the directory.
5.
Enter the following command line:
tar –xvf /dev/rfloppy/c201d0s0 pathname
Enter
where pathname is the pathname of the file or directory contain-
ing files that you want to restore from the diskette. If you don’t
specify pathname, everything on the floppy diskette is restored.
Listing the Files on a Floppy Diskette
Use the following instructions to list the files on a floppy diskette:
1.
Load the floppy diskette into the disk drive.
2.
Click on the Terminal Control on the Front Panel of your
Workspace.
A terminal window opens.
3.
Move the mouse cursor into the terminal window and click the
left mouse button.