HP Visualize J5000, Owner'S Manual

Page: 41 / 273

1-23
Before you begin using your workstation, take a moment to gather the
following important information and note it in the appropriate subsec-
tion for future use:
•
LANIC ID
•
SCSI device ID
•
Device file used for each SCSI device
•
Internet Protocol (IP) address
•
Subnetwork mask
NOTICE: For help with these, refer to Using your HP
Workstation.
LANIC ID
Locate the contents label that comes with the workstation shipping
carton. Find the LANIC ID listed there and record it here:
LANIC ID _______________________________________________
You can also get your LANIC ID by using the the lanscan command
in a terminal window. To do this, follow these steps:
1.
Turn your workstation and monitor on, if you have not already
done so. Figure 1–1 of this chapter shows the location of the
power switch on the workstation. See the documentation that
came with your monitor for the location of the monitor power
switch.
2.
Move the mouse cursor to the Terminal Control on the Front
Panel of your Workspace and click the left mouse button.
Important
Information
You Need to
Note