manualshive.com logo in svg

HP Visualize J5000, Owner'S Manual

Share
Download
HP Visualize J5000 Owner'S Manual Download Page 253

GL-11

hard disk drive

A device that stores data on a hard disk. The hard disk is a permanent
part of the drive and cannot be removed.

HCRX color graphics

Accelerated 8–plane or 24–plane graphics. See also CRX color
graphics.

Help Manager

The HP VUE application that provides online help.

$HOME

The environment variable representing the home directory. This is the
directory in which you are placed after you log in. Typically, this is

/users/

login, where login is your username. See also home direc-

tory.

home directory

A shorthand way of referring to a frequently used directory, almost
always the login directory.

host

See cluster server.

host name

See internet protocol address.

HP–UX cluster

See cluster node, cluster server.

Summary of Contents for Visualize J5000


















































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands