HP Vectra VE6 8, User Manual

Page: 15 / 58

English 7
1 Setting Up and Using Your PC
Connecting the Power Cables
Connecting the Power Cables
WARNING
For your safety, always connect the equipment to a grounded wall
outlet. Always use a power cable with a properly grounded plug, such
as the one provided with this equipment or in compliance with your
national regulations. This PC is disconnected from the power by
removing the power cable from the power outlet. This means the PC
must be located close to a power outlet that is easily accessible.
Voltage Selection
Switch Your PC may have a voltage selection switch as shown in the diagram
below.
If your PC does not have a voltage selection switch, go straight to step
3 below. Otherwise begin at step 1.
1 Remove the warning label covering the PC’s power connector.
2 Check that the voltage setting is correct for your country. (The
voltage is set during manufacture and should be already correct.)
Voltage
Selection
Switch
birddt.bk : birddt1.fb4 Page 7 Monday, April 20, 1998 4:19 PM