manualshive.com logo in svg

HP TC1100 - Compaq Tablet PC, Hardware And Software Manual

The HP TC1100 - Compaq Tablet PC is a versatile device that combines the convenience of a tablet with the productivity of a laptop. To ensure your device remains in top condition, it's important to have the Maintenance And Service Manual on hand. Download this comprehensive manual for free from manualshive.com, your ultimate destination for user manuals.

Share
Download
background image

Pointing Devices and Keyboard

Hardware and Software Guide

3–8

The following 5 video transmission types, with examples of 
devices that use them, are supported by the

 fn+f4 

hotkey:

■

LCD (tablet PC display)

■

External VGA (most external monitors)

■

S-Video (televisions, camcorders, VCRs, and video capture 
boards with S-Video-in jacks)

■

Composite video (televisions, camcorders, VCRs, and video 
capture boards with composite-video in jacks)

■

DVI-D (external monitors that support the DVI-D interface)

✎

Composite video and DVI-D can be connected to the tablet PC 
only when the tablet PC is docked in an optional docking device.

Viewing Battery Charge Information (fn+f8)

Press 

fn+f8

 to display charge information for all installed battery 

packs. The display indicates which battery packs are charging and 
reports the amount of charge remaining in each battery pack.

Battery pack locations are indicated by number:

■

Location 1 is the primary battery pack.

■

Location 2 is the travel battery pack.

Summary of Contents for TC1100 - Compaq Tablet PC

















































































































































































































































































Reviews:

No comments

Related manuals for TC1100 - Compaq Tablet PC

StarTech.com SDOCK2U33 Instruction Manual preview
SDOCK2U33
Brand: StarTech.com Pages: 11
Techno Line WS 6448 Manual preview
WS 6448
Brand: Techno Line Pages: 39
Dreamcom 10 series User Manual preview
10 series
Brand: Dreamcom Pages: 104
Acer Universal USB 2.0 Docking Station User Manual preview
Universal USB 2.0 Docking Station
Brand: Acer Pages: 18
Acer ProDock User Manual preview
ProDock
Brand: Acer Pages: 48
Acer ezDock II User Manual preview
ezDock II
Brand: Acer Pages: 24
Acer ADK930 User Manual preview
ADK930
Brand: Acer Pages: 18
Honeywell 1002UU02 Quick Start Manual preview
1002UU02
Brand: Honeywell Pages: 9
Targus DOCK411USZ Quick Start Manual preview
DOCK411USZ
Brand: Targus Pages: 2
Targus ACP78US Quick Start Manual preview
ACP78US
Brand: Targus Pages: 3
Sharper Image EC-A115 Instruction Manual And Warranty Information preview
EC-A115
Brand: Sharper Image Pages: 8
WeatherHawk WindMate 350 User Manual preview
WindMate 350
Brand: WeatherHawk Pages: 5
La Crosse W86111 Faq preview
W86111
Brand: La Crosse Pages: 12
Icy Box IB-DK2241AC User Manual preview
IB-DK2241AC
Brand: Icy Box Pages: 14
GARNI 940 Instruction Manual preview
940
Brand: GARNI Pages: 33
Parrot Zikmu User Manual preview
Zikmu
Brand: Parrot Pages: 29
ISOUND 2X PLUS Manual preview
2X PLUS
Brand: ISOUND Pages: 1
La Crosse Technology WS-9118U Instruction Manual preview
WS-9118U
Brand: La Crosse Technology Pages: 21

Brands by name

Popular brands

Load more brands