manualshive.com logo in svg

HP TC1100 - Compaq Tablet PC, Hardware And Software Manual

The HP TC1100 - Compaq Tablet PC is a versatile device that combines the convenience of a tablet with the productivity of a laptop. To ensure your device remains in top condition, it's important to have the Maintenance And Service Manual on hand. Download this comprehensive manual for free from manualshive.com, your ultimate destination for user manuals.

Share
Download
background image

Memory Modules

Hardware and Software Guide

9–2

Expansion Memory Module Slot

To add or upgrade a memory module in the expansion memory 
module slot:

1. Shut down the tablet PC. (If you are not sure whether the 

tablet PC is off or in hibernation, turn the tablet PC on by 
sliding the power switch toward the front of the tablet PC. 
Then shut down the tablet PC through the operating system.)

2. Disconnect all external devices connected to the tablet PC.

3. Disconnect the power cord.

4. Turn the tablet PC upside down.

5. Remove any battery packs from the tablet PC.

6. Loosen the memory module cover screws 

1

.

7. Lift the memory module cover 

2

 away from the tablet PC.

Summary of Contents for TC1100 - Compaq Tablet PC

















































































































































































































































































Reviews:

No comments

Related manuals for TC1100 - Compaq Tablet PC

DAVIS 6370 Installation Manual preview
6370
Brand: DAVIS Pages: 4
DAVIS 6320 Installation Manual preview
6320
Brand: DAVIS Pages: 24
DAVIS WeatherLink User Manual preview
WeatherLink
Brand: DAVIS Pages: 8
Tripp Lite U442-DOCK5-GY Owner'S Manual preview
U442-DOCK5-GY
Brand: Tripp Lite Pages: 42
Auriol 4-LD5531 Quick Start Manual preview
4-LD5531
Brand: Auriol Pages: 41
Hyundai WSC 1918 Girl Instruction Manual preview
WSC 1918 Girl
Brand: Hyundai Pages: 48
AMX VPA-DS Dimensional Drawing preview
VPA-DS
Brand: AMX Pages: 1
AMX Table Charging Station MVP-TCS-52 Installation Manual preview
Table Charging Station MVP-TCS-52
Brand: AMX Pages: 1
AMX MVP-TCS-52 Dimension Manual preview
MVP-TCS-52
Brand: AMX Pages: 2
Targus DV1K-4K Quick Start Manual preview
DV1K-4K
Brand: Targus Pages: 25
RAM Mounting Systems RPR-182-CO5-INS Owner'S Manual preview
RPR-182-CO5-INS
Brand: RAM Mounting Systems Pages: 2
La Crosse Technology 308-1711BL Manual preview
308-1711BL
Brand: La Crosse Technology Pages: 6
La Crosse WD-3210 Owner'S Manual preview
WD-3210
Brand: La Crosse Pages: 25
La Crosse 308-1711BL Instruction Manual preview
308-1711BL
Brand: La Crosse Pages: 10
La Crosse BBB86064 Instruction Manual preview
BBB86064
Brand: La Crosse Pages: 6
GARNI 030H Instruction Manual preview
030H
Brand: GARNI Pages: 12
GARNI 940 Instruction Manual preview
940
Brand: GARNI Pages: 33
La Crosse Technology WA-1030U Owner'S Manual preview
WA-1030U
Brand: La Crosse Technology Pages: 31

Brands by name

Popular brands

Load more brands