manualshive.com logo in svg

HP TC1100 - Compaq Tablet PC, Hardware And Software Manual

The HP TC1100 - Compaq Tablet PC is a versatile device that combines the convenience of a tablet with the productivity of a laptop. To ensure your device remains in top condition, it's important to have the Maintenance And Service Manual on hand. Download this comprehensive manual for free from manualshive.com, your ultimate destination for user manuals.

Share
Download
background image

Multimedia

Hardware and Software Guide

5–10

Observing the Copyright Warning

It is a criminal offense, under applicable copyright laws, to make 
unauthorized copies of copyright-protected material, including 
computer programs, films, broadcasts, and sound recordings. 
This tablet PC should not be used for such purposes.

Installing Software

To install software included with the tablet PC from a CD:

1. Insert an appropriate optical drive into an optional external 

MultiBay or MultiBay II.

2. Connect the tablet PC to a reliable electrical outlet.

3. Close any open applications.

4. Insert a software CD into the optional external optical drive.

❏

If Autorun is enabled an installation wizard is displayed.

❏

If Autorun is disabled, select 

Start > Run.

 Enter:

x:\setup.exe

where 

x

 is your CD drive designation

and then select 

OK.

5. When the installation wizard is displayed, follow the 

installation instructions on the screen.

6. Restart the tablet PC if prompted.

✎

Repeat the installation procedure for all software you want to 
install.

✎

WinDVD Creator has special drive requirements for proper 
installation. To install WinDVD Creator, refer to the instructions 
provided with the 

InterVideo WinDVD Creator

 CD.

Summary of Contents for TC1100 - Compaq Tablet PC

















































































































































































































































































Reviews:

No comments

Related manuals for TC1100 - Compaq Tablet PC

Springfield CA86514 Instructional Manual preview
CA86514
Brand: Springfield Pages: 12
La Crosse Technology 308-1451v2 Instructions Manual preview
308-1451v2
Brand: La Crosse Technology Pages: 13
PHYWE Cobra SMARTsense Operating Instructions Manual preview
Cobra SMARTsense
Brand: PHYWE Pages: 6
La Crosse Technology Family Weather Station Instruction Manual preview
Family Weather Station
Brand: La Crosse Technology Pages: 53
Ambient Weather WS-YG710S-Y Manual preview
WS-YG710S-Y
Brand: Ambient Weather Pages: 7
Brandson Equipment 304465 User Manual preview
304465
Brand: Brandson Equipment Pages: 64
Minox WINDWATCH PROII Instruction Manual preview
WINDWATCH PROII
Brand: Minox Pages: 79
Grundig PAD01 Instruction Manual preview
PAD01
Brand: Grundig Pages: 16
iPort IW-1 Brochure preview
IW-1
Brand: iPort Pages: 10
iPort IW-2 Instruction Manual preview
IW-2
Brand: iPort Pages: 18
Electronic.Star 10007065 User Manual preview
10007065
Brand: Electronic.Star Pages: 10
ISOUND 4X GLOW Manual preview
4X GLOW
Brand: ISOUND Pages: 1
La Crosse Technology WS-2010 Software Manual preview
WS-2010
Brand: La Crosse Technology Pages: 67
Apollo RoadRunner Installation Manual preview
RoadRunner
Brand: Apollo Pages: 16
BEARWARE 303456/20191119HK016 Manual preview
303456/20191119HK016
Brand: BEARWARE Pages: 72
La Crosse Technology 308-1414M Manual preview
308-1414M
Brand: La Crosse Technology Pages: 12
JBL ON STAGE III Technical Specifications preview
ON STAGE III
Brand: JBL Pages: 2
XtremeMac INCHARGE SYNC IPU-ICS13 User Manual preview
INCHARGE SYNC IPU-ICS13
Brand: XtremeMac Pages: 7

Brands by name

Popular brands

Load more brands