manualshive.com logo in svg

HP TC1100 - Compaq Tablet PC, Hardware And Software Manual

The HP TC1100 - Compaq Tablet PC is a versatile device that combines the convenience of a tablet with the productivity of a laptop. To ensure your device remains in top condition, it's important to have the Maintenance And Service Manual on hand. Download this comprehensive manual for free from manualshive.com, your ultimate destination for user manuals.

Share
Download
background image

Power

Hardware and Software Guide

2–28

To fully discharge a battery pack:

1. Right-click the 

Power Meter

 icon on the notification area 

and select 

Adjust Power Properties.

– or – 

Access the Power Schemes tab by selecting 

Start > Control 

Panel > Performance and Maintenance > Power 
Options > Power Schemes

 tab.

2. Make a note of the 4 settings in the Plugged In column and 

the 4 settings in the Running on Batteries column so that you 
can reset them after the calibration.

3. Use the drop-down lists to set the 8 options (4 in each 

column) to 

Never.

4. Select 

OK.

5. Disconnect the tablet PC from the external power source, but 

do 

not

 turn off the tablet PC.

6. Run the tablet PC on battery power until the battery pack is 

fully discharged. The battery light begins to blink when the 
battery pack has discharged to a low-battery condition. When 
the battery pack is fully discharged, the battery light is turned 
off and the tablet PC shuts down.

Summary of Contents for TC1100 - Compaq Tablet PC

















































































































































































































































































Reviews:

No comments

Related manuals for TC1100 - Compaq Tablet PC

iLive ISP301B User Manual preview
ISP301B
Brand: iLive Pages: 12
La Crosse Technology WS-9410TWC Manual preview
WS-9410TWC
Brand: La Crosse Technology Pages: 3
Lindy 43234 User Manual preview
43234
Brand: Lindy Pages: 8
Explore Scientific WSX1001 Instruction Manual preview
WSX1001
Brand: Explore Scientific Pages: 28
Altec Lansing MOONDANCE HOME User Manual preview
MOONDANCE HOME
Brand: Altec Lansing Pages: 24
Jensen banshee JiSS-550 Owner'S Manual preview
banshee JiSS-550
Brand: Jensen Pages: 8
Jensen JiMS-125 Owner'S Manual preview
JiMS-125
Brand: Jensen Pages: 18
iPort IW-1 Brochure preview
IW-1
Brand: iPort Pages: 10
Havis DS-PAN-720 Series Owner'S Manual preview
DS-PAN-720 Series
Brand: Havis Pages: 13
Havis DS-DELL-420 Series Owner'S Manual preview
DS-DELL-420 Series
Brand: Havis Pages: 17
IROX HBVR761 UV-X User Manual preview
HBVR761 UV-X
Brand: IROX Pages: 6
Schulte Elektrotechnik EVOline V-Dock Operating And Assembly Instructions preview
EVOline V-Dock
Brand: Schulte Elektrotechnik Pages: 4
UNITEC Climate W185 Owner'S Manual preview
W185
Brand: UNITEC Climate Pages: 20
invebo BC7A Installation Instructions preview
BC7A
Brand: invebo Pages: 5
Hama 00176924 Operating Instructions Manual preview
00176924
Brand: Hama Pages: 73
brennenstuhl FS 40 H Owner'S Manual preview
FS 40 H
Brand: brennenstuhl Pages: 100
NASA Marine Meteoman Manual preview
Meteoman
Brand: NASA Marine Pages: 8
Wind & Weather ID3587 User Manual preview
ID3587
Brand: Wind & Weather Pages: 8

Brands by name

Popular brands

Load more brands