manualshive.com logo in svg

HP storevirtual 3200, User Manual

Share
Download
HP storevirtual 3200 User Manual Download Page 86

Field

Description

Password

Password required to access the proxy server.

Confirm password

Re-enter the password for verification

RSvS alarms

Remote Support via STaTS (RSvS) alarms help to identify any Remote Support-specific issues.

Viewing RSvS alarms

To access RSvS alarms, select 

Active Alarms

 from the StoreVirtual main menu.

Table 17: RSvS alarm messages

Alarm message

1

Description

EID_RSVS_SUMM_STATUS_NOT_ENABLED

RSvS service not enabled.

EID_RSVS_CONFIG_MISSING

This message appears for one of the following
reasons:

• Customer contact information is either not entered

or partially entered.

• A selection was not made indicating that HPE or

partners could contact you to suggest
optimizations.

• Entitlement information could not be acquired

from the system.

EID_RSVS_CONN_STATUS_ERROR

There are connectivity issues such as:

• Proxy server or Hewlett Packard Enterprise URL

is not reachable.

• DNS is not configured properly.

EID_RSVS_SUMM_STATUS_MAINTENANCE

Device is under maintenance.

EID_RSVS_REG_STATUS_NOT_REGISTERED

Device is not registered.

EID_RSVS_SUMM_STATUS_CORRUPT

RSvS service is not started or the RSvS
configuration file is malformed.

EID_RSVS_SUMM_STATUS_ERROR

• After the device is registered, the customer

contact information is either removed or partially
removed.

• Device is registered and there are connectivity

issues such as either the Proxy Server or the
Hewlett Packard Enterprise URL is not reachable.

1

All alarms displayed in this table have a "Warning" level alarm status.

86

 RSvS alarms

Summary of Contents for storevirtual 3200

































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands