manualshive.com logo in svg

HP storevirtual 3200, User Manual

Share
Download
HP storevirtual 3200 User Manual Download Page 83

Table 15: Remote Support settings

Setting

Description

Remote support level

Describes the level of support configured on the
StoreVirtual appliance:

• Passive (default) – Allows events to be sent out

but does not permit inbound queries.

• No support – No events are sent out and does not

permit inbound queries (Remote Support is
disabled).

Allow contact from HPE and authorized
representatives.

If you select 

Yes

, Hewlett Packard Enterprise and

partners may contact you to discuss optimization
options for your storage system. These options are
based on alerts and log file data that is sent with
Remote Support.

Additionally, Hewlett Packard Enterprise will continue
to contact you for support as needed, based on the
events sent with Remote Support.

If you select

 No

, Hewlett Packard Enterprise and

partners will not contact you based on the data sent
back from Remote Support. If Remote Support is
disabled, then HPE support will not contact you
based on automated cases.

Target HPE server

The HPE server that receives the event messages.
The server is automatically populated and must not
be changed unless you have a specific reason to do
so.

Support from

Select who will provide support: HPE Direct or HPE
Partner. If you select 

HPE Partner

, enter the Partner

ID in the appropriate field.

Support Identifier

Enables viewing the storage device in the StoreFront
Remote Manager

For more information, see 

https://

www.storefrontremote.com/

.

Custom delivery ID

Customer-entered custom delivery ID

NOTE:

If you select 

Passive

 in the 

Remote support level

 field, you must complete the other fields. If you

select 

No Support

, you do not have to complete any other fields.

Remote support

83

Summary of Contents for storevirtual 3200

































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands