4.
At this point you may choose to define the Subnets for the
Port Set
or to create additional
Port Sets by clicking on
Add
in the Port set section. For the purposes of this example, we
shall continue to
Subnet
configuration.
TIP:
It is good practice to
Save
the network configuration at regular intervals.
Step 3: Create Subnets
1.
Select the Port Set and click
Add
in the Subnet section.
Table 13 Network Configuration New Subnet fields
Description
Name
The name of the Subnet
Name
Select IPv4 or IPv6.
Protocol
The IP address for the subnet, in the appropriate format
for the protocol selected.
IP address
When checked, this box indicates that this is the Subnet
that contains the default gateway. A default subnet
should be provided for both IPv4 and IPv6 networks.
Default Subnet
The network mask
Network Mask (IPv4 only)
The network prefix in CIDR format
Prefix (IPv6 only)
The domain name
Domain Name
The VLAN tag ID (2 to 4096)
VLAN tag
2.
Provide the Subnet details listed in
Network configuration subnet fields (page 48)
, and click
OK
.
•
For IPv4 Subnets, select the IPv4 button and provide the relevant details.
•
For IPv6 Subnets, select the IPv6 button and provide the relevant details.
•
DHCP Subnets may support both IPv4 and IPv6 protocols.
48
Complete network configuration