manualshive.com logo in svg

HP StoreOnce 3100, System Installation And Configuration Manual, Page: 43 / 73

Share
Download
HP StoreOnce 3100 System Installation And Configuration Manual Download Page 43

More about warranty details

•

StoreOnce 3100 and 3500 Systems: These systems have a single entry. The warranty serial
number covers both the server and the embedded disks.

•

StoreOnce 5100 Systems: These systems have a separate entry for the server, where the
warranty serial number covers both the server and the embedded disks.

If additional storage enclosures have been installed, there will be a separate entry for each
enclosure, and each entry will have a unique warranty serial number. (The warranty product
number is identical for each enclosure.)

•

StoreOnce 5500 Systems: These systems have a separate entry for the server, where the
warranty serial number covers both the server and the base storage.

If additional disk packs have been installed, there will be a separate entry for each disk pack.
This is for information only; disk packs do not carry warranty details (the warranty columns
will show

Not Applicable

).

If an additional disk enclosure has been installed, it will have a separate entry with a unique
warranty serial number. (Additional disk packs installed in the additional enclosure are
displayed without the warranty serial number or the warranty part number and this is a
non-editable field.)

More about warranty details

43

Summary of Contents for StoreOnce 3100










































































Reviews:

No comments