Each Capacity Upgrade after installation requires a license that must be loaded.
NOTE:
If capacity expansion has been ordered and pre-configured by the factory with the base
system, the license will already have been applied.
Security
Security:
Security features (Data at Rest Encryption, Data in Flight Encryption, and Secure
Erase) require a Security license.
NOTE:
Data in flight encryption is intended to be used to secure links between data centers
for StoreOnce VTL or NAS Replication or Low Bandwidth Catalyst Copy operations. Using Data
In Flight Encryption for direct backup operations to the StoreOnce appliance over a local network
is not supported due to the performance impact of the encryption.
Target devices and stores
•
StoreOnce Catalyst:
StoreOnce Catalyst devices require a license for backup and for copy,
so licenses must be installed on both origin and destination StoreOnce Systems.
•
Replication:
VTL and NAS replication requires a license on the target system.
StoreOnce Optional Hardware
Optional PCIe cards:
These are additional 10 GbE Network and Fibre Channel cards that may
be installed in the PCIe slots on the StoreOnce 5500 System, StoreOnce 3500 Series and the
StoreOnce 5100 System. Each additional FC or 10 GbE card must be licensed. See
for more details.
NOTE:
The StoreOnce 3100 does not support optional PCIe cards.
Checking for installed licenses
In the
Navigator
pane, click on
License Management
.
This page details of any licenses that have been already installed. The following example shows
an HPE StoreOnce 3540 System which has been licensed for 100% storage capacity.
24
Configuring licenses