HP StorageWorks XP12000 Site Preparation Manual Download Page 62

Page: 62 / 98

HP StorageWorks XP12000 Disk Array Site Preparation Guide

Checking for shipping shortage and damage

Upon delivery of each equipment shipment:

1. Carefully check the carrier’s bill of lading to ensure that the items listed

match the items delivered. Notify the carrier immediately if there are
any discrepancies or missing items.

2. Inspect all shipping containers for signs of damage, such as dents,

scratches, cuts, or water marks.

3. If you see any damage to the containers:

a. Note on the bill of lading that there is apparent damage, subject to

inspection.

b. Arrange for the carrier’s representative and an HP representative to

be present when the item in question is unpacked.

c. Contact your HP representative, who will make sure any damaged

components are replaced, regardless of the circumstances and
without waiting for any claim settlements.

Summary of Contents for StorageWorks XP12000



































































































Search results

Summary of Contents for StorageWorks XP12000

Reviews:

Related manuals for StorageWorks XP12000

Brands by name

Popular brands

HP StorageWorks XP12000, Site Preparation Manual

Search results

Summary of Contents for StorageWorks XP12000

Reviews:

Related manuals for StorageWorks XP12000

Brands by name

Popular brands