manualshive.com logo in svg

HP StorageWorks SSL1016, Reference Manual

Share
Download
HP StorageWorks SSL1016 Reference Manual Download Page 21

Overview

21

SSL1016 Tape Autoloader Reference Guide

DCA

The drive carrier assembly (DCA) is configured with one DLT1, SDLT 320, or 
Ultrium 460 tape drive, depending on the model. The DCA facilitates the easy 
removal of the drive. To change tape drives, you can replace the DCA without 
having to remove the top cover of the autoloader.

Barcode Reader

The barcode reader provides inventory feedback to the host application and/or 
LCD panel by reading the cartridge barcode labels. The autoloader stores the 
customized inventory data in its non-volatile memory.

For best performance, HP recommends using only HP barcode labels:

■

Part number C9240-67903 for DLT or SDLT cartridges 

■

Part number C7970B for Ultrium data cartridges 

Supported Software

The autoloader supports most major operating systems and is also compatible 
with most popular backup software applications.

Note:  

Information on specific supported operating systems and backup applications 

can be found at 

http://www.hp.com

 and at vendor websites.

Summary of Contents for StorageWorks SSL1016

































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands