HP StorageWorks SSL1016, Reference Manual

Page: 134 / 160

Troubleshooting
134 SSL1016 Tape Autoloader Reference Guide
A5 Source element
empty
■
Verify that the expected source really does have a
cartridge.
■
Run the Health test.
■
If the source is a magazine, replace the cartridge in
that slot with a different cartridge and try again. If
error continues, replace the magazine.
■
If source is the tape drive, verify the tape drive has a
cartridge and it was ejected.
■
Power cycle the autoloader.
■
If error continues, contact HP customer support.
A6 Source magazine
missing
■
Verify the magazine is installed correctly into the
autoloader.
■
Remove and insert the magazine again.
■
Run the Health test.
■
Try a different magazine or magazine blank.
■
Power cycle the autoloader.
■
Replace the magazine.
A7 Destination
magazine missing
■
Verify the magazine is installed correctly into the
autoloader.
■
Remove and insert the magazine again.
■
Run the Health test.
■
Try a different magazine or magazine blank.
■
Power cycle the autoloader.
■
Replace the magazine.
Table 14: Error Messages
Error Message Description Suggested Repair