HP StorageWorks 9100 - Extreme Data Storage System, User Manual, Page: 24 / 50

Error codes
Table 4 Error codes
Error code
Description
Required action
C n 01
Con fi guration error—Hardware not
supported
Log error, check hardware and cable
connections.
F n 00 – F n 67 Firmware error
Log error, restart enclosure. If error persists,
contact HP support.
H n 00 – H n 29 Hardware error—Controller error
Log error, contact HP support, replace
controller.
H n 30 Hardware error—Fatal ECC error
Log error, contact HP support, replace
cache module.
H n 31–66 Hardware error—Controller error
Log error, contact HP support, replace
controller.
H n 67 Hardware error—SAS expander error
Log error, contact HP support, verify
cabling. If error persists, replace controller.
Fan module LEDs
Item Description Status
1 Fan module LED
Green—Normal operation
Blinking amber—Fan fault condition exists
Off—Fan unseated from connector or has failed
24
LED descriptions