background image

Notice

© Hewlett-Packard Company, 2002. All rights 
reserved.

A6250-96020

Hewlett-Packard Company makes no warranty of 
any kind with regard to this material, including, but 
not limited to, the implied warranties of 
merchantability and fitness for a particular purpose. 
Hewlett-Packard shall not be liable for errors 
contained herein or for incidental or consequential 
damages in connection with the furnishing, 
performance, or use of this material.

This document contains proprietary information, 
which is protected by copyright. No part of this 
document may be photocopied, reproduced, or 
translated into another language without the prior 
written consent of Hewlett-Packard. The 
information contained in this document is subject to 
change without notice.

Format Conventions

WARNING

Identifies a hazard that can cause 
personal injury

Caution

Identifies a hazard that can cause 
hardware or software damage

Note

Identifies significant concepts or 
operating instructions

this font 

- used for all text to be typed 

verbatim: all commands, path names, file names, 
and directory names also, text displayed on the 
screen 

<this font>   - used for variables used in commands

this font

 - used for GUI menu options and screen 

controls

Trademark Information

Red Hat is a registered trademark of Red Hat Co.

C.A. UniCenter TNG is a registered trademark of 
Computer Associates International, Inc. 

Microsoft, Windows NT, and Windows 2000 are 
registered trademarks of Microsoft Corporation 

HP, HP-UX are registered trademarks of Hewlett-
Packard Company. Command View, Secure 
Manager, Business Copy, Auto Path, Smart Plug-
Ins are trademarks of Hewlett-Packard Company

Adobe and Acrobat are trademarks of Adobe 
Systems Inc.

Java and Java Virtual Machine are trademarks of 
Sun Microsystems Inc.

NetWare is a trademark of Novell, Inc. 

AIX is a registered trademark of International 
Business Machines, Inc.

Tru64 and OpenVMS are registered trademarks of 
Compaq Corporation.

Summary of Contents for StorageWorks 2405 - Disk System

















































































































































Reviews: