manualshive.com logo in svg

HP Spectre x360 Convertible 13-ac000, Maintenance And Service Manual, Page: 8 / 75

Share
Download
HP Spectre x360 Convertible 13-ac000 Maintenance And Service Manual Download Page 8

TouchPad .............................................................................................................................................................. 35
Power button board ............................................................................................................................................. 36
RTC battery ..........................................................................................................................................................  37
System board ....................................................................................................................................................... 39
Heat sink ..............................................................................................................................................................  44
Speaker, right rear ...............................................................................................................................................  46
Rear fan ................................................................................................................................................................ 47
Display assembly .................................................................................................................................................  48
Top cover and keyboard ....................................................................................................................................... 50

6  Using Setup Utility (BIOS) ............................................................................................................................. 51

Starting Setup Utility (BIOS) ................................................................................................................................  51
Updating Setup Utility (BIOS) ..............................................................................................................................  51

Determining the BIOS version ........................................................................................................... 51
Downloading a BIOS update .............................................................................................................. 52

7  Using HP PC Hardware Diagnostics (UEFI) ....................................................................................................... 53

Downloading HP PC Hardware Diagnostics (UEFI) to a USB device ....................................................................  53

8  Specifications .............................................................................................................................................. 55

9  Backing up, restoring, and recovering ...........................................................................................................  56

Creating recovery media and backups ................................................................................................................  56

Creating HP Recovery media (select products only) ......................................................................... 56

Using Windows tools ...........................................................................................................................................  57
Restore and recovery ........................................................................................................................................... 58

Recovering using HP Recovery Manager ........................................................................................... 58

10  Power cord set requirements ......................................................................................................................  62

Requirements for all countries ............................................................................................................................ 62
Requirements for specific countries and regions ................................................................................................ 62

11  Recycling ..................................................................................................................................................  64

Index .............................................................................................................................................................  65

viii

Summary of Contents for Spectre x360 Convertible 13-ac000












































































Reviews:

No comments