manualshive.com logo in svg

HP Spectre x360 Convertible 13-ac000, Maintenance And Service Manual, Page: 44 / 75

Share
Download
HP Spectre x360 Convertible 13-ac000 Maintenance And Service Manual Download Page 44

Power button board

Description

Spare part number

Power button board

907337-001

Power button board cable

907330-001

Before removing the power button board, follow these steps:

1.

Shut down the computer. If you are unsure whether the computer is off or in Hibernation, 
turn the computer on, and then shut it down through the operating system.

2.

Disconnect all external devices connected to the computer.

3.

Disconnect the power from the computer by first unplugging the power cord from the AC outlet and then 
unplugging the AC adapter from the computer.

4.

Remove the bottom cover (see 

Bottom cover on page 24

).

5.

Remove the battery (see 

Battery on page 26

).

Remove the power button board:

1.

Release the zero insertion force (ZIF) connector (1) to which the cable is attached, and then 
disconnect the  cable from the power button board.

2.

Remove the Phillips PM2.0×1.2 screw (2) that secures the board to the computer.

3.

Lift the cable to disengage the adhesive that secures the cable to the computer (3).

4.

Remove the power button board from the computer (4).

Reverse this procedure to install the power button board.

36

Chapter 5   Removal and replacement procedures for Authorized Service Provider parts

Summary of Contents for Spectre x360 Convertible 13-ac000












































































Reviews:

No comments