manualshive.com logo in svg

HP Spectre x360 Convertible 13-ac000, Maintenance And Service Manual, Page: 12 / 75

Share
Download
HP Spectre x360 Convertible 13-ac000 Maintenance And Service Manual Download Page 12

2

External component identification

Right side

Component

Description

(1)

 

Volume button

Controls speaker volume on the computer.

(2)

USB Type-C power connector and Thunderbolt 
ports (2)

Connects an AC adapter that has a USB Type-C connector, 
supplying power to the computer, and if needed, charging the 
computer battery.

– or –

Connects and charges a USB device that has a Type-C connector, 
such as a cell phone, camera, activity tracker, or smartwatch, 
and provides high-speed data transfer.

– or –

Connects a display device that has a USB Type-C connector, 
providing display output.

NOTE:

Your computer may also support a Thunderbolt docking 

station.

(3)

 

AC adapter and battery light

●

White: The AC adapter is connected and the battery is fully 
charged.

●

Blinking white: The AC adapter is disconnected and the 
battery has reached a low battery level.

●

Amber: The AC adapter is connected and the battery is 
charging.

●

Off: The battery is not charging.

4

Chapter 2   External component identification

Summary of Contents for Spectre x360 Convertible 13-ac000












































































Reviews:

No comments