manualshive.com logo in svg

HP Spectre x360 Convertible 13-ac000, Maintenance And Service Manual, Page: 45 / 75

Share
Download
HP Spectre x360 Convertible 13-ac000 Maintenance And Service Manual Download Page 45

RTC battery

Description

Spare part number

RTC battery

907341-001

Before removing the RTC battery, follow these steps:

1.

Shut down the computer. If you are unsure whether the computer is off or in Hibernation, 
turn the computer on, and then shut it down through the operating system.

2.

Disconnect all external devices connected to the computer.

3.

Disconnect the power from the computer by first unplugging the power cord from the AC outlet and then 
unplugging the AC adapter from the computer.

4.

Remove the bottom cover (see 

Bottom cover on page 24

).

5.

Remove the battery (see 

Battery on page 26

).

Remove the RTC battery:

1.

Disconnect the battery cable from the system board (1) (to avoid system board damage, see caution and 
associated image that follows step 2).

2.

Remove the RTC battery from the computer (2).

CAUTION:

To avoid damage to the system board, press down on the location as shown by callout (1) in the 

following image when disconnecting the RTC battery cable (3).

RTC battery

37

Summary of Contents for Spectre x360 Convertible 13-ac000












































































Reviews:

No comments