HP SimpliVity OmniCube CN-1400 Installation And Maintenance Manual Download Page 65

Page: 65 / 66

Websites

Term

Definition

OmniStack software

The SimpliVity software running on the OmniStack Virtual Controller.

(Previously referred to as OmniCube software.)

OmniStack Virtual

Controller
(OVC)

A virtual machine dedicated to the OmniStack host that runs the OmniStack

software. This software in turn communicates with the OmniStack Accelerator

card inside the host. (Previously referred to as an OmniCube Virtual Controller.)

SimpliVity Arbiter

See Arbiter.

standard host

A host that does not contain OmniStack software.

virtual machine
(VM)

A virtual computer environment that runs a guest operating system and

associated application software. Multiple virtual machines can operate

concurrently on the same physical host machine.

Websites

General websites

• Hewlett Packard Enterprise Information Library:

http://www.hpe.com/info/EIL

• Single Point of Connectivity Knowledge (SPOCK) Storage compatibility matrix:

http://www.hpe.com/storage/spock

• Storage white papers and analyst reports:

http://www.hpe.com/storage/whitepapers

• Customer Self Repair:

http://www.hpe.com/support/selfrepair

• Insight Remote Support:

http://www.hpe.com/info/insightremotesupport/docs

Regulatory information

To view the regulatory information for your product, view the Safety and Compliance Information for

Server, Storage, Power, Networking, and Rack Products, available at the Hewlett Packard Enterprise

Support Center:

http://www.hpe.com/support/Safety-Compliance-EnterpriseProducts

Additional regulatory information

Hewlett Packard Enterprise is committed to providing our customers with information about the chemical

substances in our products as needed to comply with legal requirements such as REACH (Regulation EC

No 1907/2006 of the European Parliament and the Council). A chemical information report for this product

can be found at:

http://www.hpe.com/info/reach

Summary of Contents for SimpliVity OmniCube CN-1400



































































Search results

Summary of Contents for SimpliVity OmniCube CN-1400

Reviews:

Related manuals for SimpliVity OmniCube CN-1400

Brands by name

Popular brands

HP SimpliVity OmniCube CN-1400, Installation And Maintenance Manual

Search results

Summary of Contents for SimpliVity OmniCube CN-1400

Reviews:

Related manuals for SimpliVity OmniCube CN-1400

Brands by name

Popular brands