HP PS110 Page 93 Configuration And Administration Manual Download

Page: 93 / 136

SPI settings

•

TCP connection idle timeout

: The length of time for which a TCP session is managed if

there is no activity.

•

UDP session idle timeout

: The length of time for which a UDP session is managed if

there is no activity.

•

H.323 data channel timeout

: The length of time for which an H.323 session is

managed if there is no activity.

DoS Detect Criteria

•

Total incomplete TCP/UDP sessions HIGH

: Defines the rate of new unestablished

sessions that cause the software to start deleting half-open sessions.

•

Total incomplete TCP/UDP sessions LOW

: Defines the rate of new unestablished

sessions that cause the software to stop deleting half-open sessions.

•

Incomplete TCP/UDP sessions (per min) HIGH

: Maximum number of allowed

incomplete TCP/UDP sessions per minute.

•

Incomplete TCP/UDP sessions (per min) LOW

: Minimum number of allowed

incomplete TCP/UDP sessions per minute.

•

Maximum incomplete TCP/UDP sessions number from same host

: Maximum

number of incomplete TCP/UDP sessions from the same host. When the maximum value is
exceeded, the host is placed on the “cracker list” and packets from the host are then
blocked for the duration specified by the

Flooding cracker block time

. During the

blocking duration, packets are just dropped and no live session exists, so there may be an
incomplete session alert.

•

Incomplete TCP/UDP sessions detect sensitive time period

: The length of time

before an incomplete TCP/UDP session is detected as incomplete.

•

Maximum half-open fragmentation packet number from same host

: The

maximum number of half-open fragmentation packets from the same host.

•

Flooding cracker block time

: Length of time that packets from a specific host are

blocked when a flood attack is detected.

Summary of Contents for PS110









































































































































Search results

Summary of Contents for PS110

Reviews:

Related manuals for PS110

Brands by name

Popular brands

HP PS110, Configuration And Administration Manual

Search results

Summary of Contents for PS110

Reviews:

Related manuals for PS110

Brands by name

Popular brands