HP PS110, Configuration And Administration Manual

Page: 38 / 136

38 WAN configuration
Server IP
Enter the PPTP server IPv4 address as assigned by your ISP.
Username
Enter your ISP-assigned user name. (Do not use characters ` " & ' # \)
Password
Enter your password (usually assigned by your ISP). (Do not use characters ` " & ' # \)
Confirm Password
Enter the password again to confirm it.
Idle Time
Select the number of minutes to elapse without activity before the PPTP connection is
disconnected. Or, you can leave the default setting of
Always On so that the connection is
kept open regardless of any activity. (Options: 1, 2, 5, 10, 30, 120 minutes and Always On)
DHCP Enable
Enables DHCP for the dynamic assignment of the WAN IP address from the ISP. You can click
Release and Renew to refresh the DHCP assignment. If you disable DHCP, enter the static
IPv4 address, subnet mask, gateway address, as well as primary and secondary DNS server
addresses, as provided by the ISP.
L2TP
The Layer 2 Tunneling Protocol (L2TP) is a common WAN protocol used for Virtual Private
Networks (VPNs) that provides a secure “tunnel” connection between the service provider and
the local network.
This page includes the following information:
Connection Type
Select L2TP as the router’s method of connecting to the ISP.
Server IP
Enter the L2TP server IPv4 address as assigned by your ISP.
Username
Enter your ISP-assigned user name. (Do not use characters ` " & ' # \)