manualshive.com logo in svg

HP PS110, Configuration And Administration Manual

Share
Download
HP PS110 Configuration And Administration Manual Download Page 17

Monitored Servers

17

3 Servers

The 

Servers

 > 

Monitor Servers

 page provides the status of selected servers and a way to 

select servers to monitor. There is a limit of ten servers that can be monitored.

Note

Server discovery and monitoring works with any HP ProLiant Server running iLO v1.4 or later. 
To discover and monitor servers running in IPv4-based environments, be sure to clear the 

iLO 

Client Applications use IPv6 first

 checkbox in the server’s iLO port IPv6 settings. For 

more information, see the HP ProLiant Server documentation.

Monitored Servers

The Monitored Servers list is the server dashboard, providing basic information and system 
health status for servers that the user has chosen to monitor. 

This page includes the following settings:

Server: System Health

Displays the status of the monitored server with one of these symbols.

•

: The device or subsystem is working correctly.

•

: The device or subsystem is operating at a reduced capacity.

•

: One or more components of the device or subsystem are non-operational.

•

: The server was taken offline.

•

: The system status cannot be determined.

Server: Product Name

Displays the product name of the monitored server.

Summary of Contents for PS110









































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands