manualshive.com logo in svg

HP PS110, Configuration And Administration Manual

Share
Download
HP PS110 Configuration And Administration Manual Download Page 49

7 Wireless configuration

The wireless settings section displays configuration settings for the access point functionality of 
the router. The sections include configuration options for radio signal characteristics, wireless 
security features, Wireless Distribution System (WDS), Wi-Fi Protected Setup (WPS), Wi-Fi 
Multimedia (WMM), and MAC authentication.

The PS110 router supports a dual-band single radio for 2.4 GHz and 5 GHz operation. This 
means that the PS110 can operate either at 2.4 GHz or 5 GHz, but not both at the same time. 

Note

The router supports a maximum of 64 wireless clients.

Viewing wireless interface status

The Status page displays the current status of radio settings, including operating frequency, 
mode, and channel, as well as specific SSID settings.

This page includes the following information:

Wireless

Displays the basic radio settings and the status of other features.

•

Radio

: Displays the status of the router’s radio.

•

Operating Frequency

: Shows if the radio is operating at 2.4 GHz or 5 GHz.

•

Mode

: The current radio mode.

Summary of Contents for PS110









































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands