This symbol indicates that the component exceeds the recommended weight for one
individual to handle safely.
WARNING:
To reduce the risk of personal injury or damage to the equipment, observe
local occupational health and safety requirements and guidelines for manual material
handling.
These symbols, on power supplies or systems, indicate that the equipment is supplied by
multiple sources of power.
WARNING:
To reduce the risk of injury from electric shock, remove all power cords to
disconnect power from the system completely.
Server warnings and cautions
WARNING:
To reduce the risk of personal injury, electric shockserver, or damage to the equipment, disconnect the
power cord to remove power from the . Pressing the Power On/Standby button does not shut off system
power completely. Portions of the power supply and some internal circuitry remain active until AC power
is removed.
WARNING:
To reduce the risk of electric, shock, fire, or damage to the equipment, only display devices that are
qualified to be made of fire-retardant material must be connected to the VGA port on the rear panel.
WARNING:
To reduce the risk of any serious safety issues, do not install or remove the equipment. The installation
and maintenance of this equipment must be carried out by qualified or approved personnel. Refer all
maintenance, upgrades, and servicing to an authorized reseller or an authorized service provider.
WARNING:
To reduce the risk of personal injury from hot surfaces, allow the drives and the internal system
components to cool before touching them.
CAUTION:
To prevent damage to electrical components, properly ground the server before beginning any
installation procedure. Improper grounding can cause ESD.
CAUTION:
To prevent improper cooling and thermal damage, do not operate the server with the access panel and
the M.2 SSD compartment cover open or removed.
CAUTION:
To prevent improper cooling and thermal damage, do not operate the server or the storage expansion
unit unless all device bays are populated with either a component or a blank.
CAUTION:
To prevent damage to electrical components, take the appropriate anti-static precautions before
beginning any installation, removal, or replacement procedure. Improper grounding can cause
electrostatic discharge.
20
Server warnings and cautions
