HP ProLiant SL160z - G6 Server Maintenance And Service Manual Download Page 52

Page: 52 / 80

Removal and Replacement Procedures 52

Figure 39

Installing the tray with system board into the chassis

Power Supply Unit (PSU)

Located on the rear panel of the server power supply is a standard auto ranging 750watt PSU with
PFC (power factor correction) function.

Figure 40

Power supply unit

WARNING:

Take note of the following reminders to reduce the risk of personal injury from electric

shock hazards and/or damage to the equipment.

•

Installation of power supply units should be referred to individuals who are qualified to service server
systems and are trained to deal with equipment capable of generating hazardous energy levels.

•

DO NOT open the power supply unit. There are no serviceable parts inside it.

To install the power supply:

Remove the power supply blank out of the power cage.

Align the power supply cage connector with the open slot of power supply.

All manuals and user guides at all-guides.com

Summary of Contents for ProLiant SL160z - G6 Server

















































































Search results

Summary of Contents for ProLiant SL160z - G6 Server

Reviews:

Related manuals for ProLiant SL160z - G6 Server

Brands by name

Popular brands

HP ProLiant SL160z - G6 Server, Maintenance And Service Manual

Search results

Summary of Contents for ProLiant SL160z - G6 Server

Reviews:

Related manuals for ProLiant SL160z - G6 Server

Brands by name

Popular brands