HP ProLiant SL160z - G6 Server Maintenance And Service Manual Download Page 31

Page: 31 / 80

Removal and Replacement Procedures 31

Table 2

Node Cable connections

Cable

System Board Designator

Internal USB connector

Node USB

J69

SATA cable connector

Node SATA1

J57

SATA cable connector

Node SATA2

J58

SATA SGPIO cable

Node SGPIO connector

J39

Table 3

AC power board connection

Cable

System Board Designator

RJ45 cable connector

RJ45 board

UID cable connector

UID LED

J12

Fan connector 1

Fan 1

Fan connector 2

Fan 2

Fan connector 3

Fan 3

J11

Fan connector 4

Fan 4

J10

Hard Drives

The Server can accommodate up to 4 hard disks drives, 2 in each tray. You can install 4 SAS hard

drives or 4 SATA hard drives into the server.

Figure 4

Hard Drive location

Item

Description

SAS/SATA Hard Drive

All manuals and user guides at all-guides.com

all-guides.com

Summary of Contents for ProLiant SL160z - G6 Server

















































































Search results

Summary of Contents for ProLiant SL160z - G6 Server

Reviews:

Related manuals for ProLiant SL160z - G6 Server

Brands by name

Popular brands

HP ProLiant SL160z - G6 Server, Maintenance And Service Manual

Search results

Summary of Contents for ProLiant SL160z - G6 Server

Reviews:

Related manuals for ProLiant SL160z - G6 Server

Brands by name

Popular brands