HP ProLiant SL160z - G6 Server Maintenance And Service Manual Download Page 45

Page: 45 / 80

Removal and Replacement Procedures 45

Figure 26

Installing PCI

riser card to the bracket

To install the riser card with the bracket into the motherboard

Align the riser card connector with the slot on the motherboard and then insert the assembly into

the slot.

Fasten the screw to secure the bracket to the chassis.

Figure 27

Installing the PCIe riser card with bracket

•

Single-Slot PCIe riser card (x4 slot)

To remove the PCIe X4 riser card with the cage:

Remove the two screws securing the PCIe X4 riser card cage to the Chassis.

Lift the PCIe X4 cage up and away from the Chassis.

All manuals and user guides at all-guides.com

Summary of Contents for ProLiant SL160z - G6 Server

















































































Search results

Summary of Contents for ProLiant SL160z - G6 Server

Reviews:

Related manuals for ProLiant SL160z - G6 Server

Brands by name

Popular brands

HP ProLiant SL160z - G6 Server, Maintenance And Service Manual

Search results

Summary of Contents for ProLiant SL160z - G6 Server

Reviews:

Related manuals for ProLiant SL160z - G6 Server

Brands by name

Popular brands