HP ProLiant SL160z - G6 Server Maintenance And Service Manual Download Page 56

Page: 56 / 80

Connectors, Switches, and LEDs 56

Connectors, Switches, and LEDs

This chapter contains illustrations and tables identifying and describing the connectors, switches,

buttons, and LED indicators located on the front panel, rear panel, system board and hard drives of
the HP ProLiant SL160z G6.

Connectors and Components

Front Panel Components

Figure 47

Front panel components

Item

Description

Tray handle

Tray latch

Serial Port

Video Port

Top: USB 2.0 Port
Bottom: USB 2.0 Port

Top: NIC Connector
Bottom: NIC Connector

IPMI Port

UID LED/SW

PCI blank

Health LED

All manuals and user guides at all-guides.com

all-guides.com

Summary of Contents for ProLiant SL160z - G6 Server

















































































Search results

Summary of Contents for ProLiant SL160z - G6 Server

Reviews:

Related manuals for ProLiant SL160z - G6 Server

Brands by name

Popular brands

HP ProLiant SL160z - G6 Server, Maintenance And Service Manual

Search results

Summary of Contents for ProLiant SL160z - G6 Server

Reviews:

Related manuals for ProLiant SL160z - G6 Server

Brands by name

Popular brands