Hardware options installation 36
For cable routing information, see "Hot-plug, SATA drive support (on page
62
)."
—
Connect one end of the Mini-SAS cable to the backplane and the other end to a storage
controller option (SATA and SAS drive support).
For cable routing information, see "Hot-plug, SATA and SAS drive support (on page
63
)."
13.
Install the drives ("
Drive options
" on page
30
).
CAUTION:
To prevent improper cooling and thermal damage, do not operate the server unless
all bays are populated with either a component or a blank.
14.
Install the air baffle (on page
22
).
15.
Install the access panel (on page
21
).
16.
Install the tower bezel (on page
19
).
17.
Connect each power cord to the server.
18.
Connect each power cord to the power source.