Setup 29
a.
Connect the Ethernet cable, and then power on the server.
b.
During server POST, press the
F10
key.
c.
Complete the initial Preferences and Registration portion of Intelligent Provisioning (on page
69
).
d.
At the 1 Start screen, click the
Configure and Install
button.
e.
To finish the installation, follow the onscreen prompts. An Internet connection is required to update
the firmware and systems software.
•
Remote deployment installation—To remotely deploy an operating system, use Insight Control server
deployment for an automated solution.
For additional system software and firmware updates, download the HP Service Pack for ProLiant from the HP
website (
http://www.hp.com/go/spp/download
). Software and firmware must be updated before using
the server for the first time, unless any installed software or components require an older version. For more
information, see "Keeping the system current (on page
77
)."
The Smart Update Firmware DVD ISO is also available at the download tab on the HP website
(
http://www.hp.com/go/foundation
).
For more information on using these installation methods, see the HP website (
http://www.hp.com/go/ilo
).
Powering on and selecting boot options
1.
Connect the Ethernet cable and press the Power On/Standby button.
2.
During the initial boot:
o
To modify the server configuration ROM default settings, press
F9
when prompted from the start up
sequence to enter the RBSU. By default, RBSU runs in the English language.
o
If you do not need to modify the server configuration and are ready to install the system software,
press
F10
to access Intelligent Provisioning.
NOTE:
If an HP Smart Array controller has been added or is embedded in the system, the
controller defaults to a RAID configuration based on the size and number of hard drives installed.
For more information on modifying the controller default settings, see the documentation on the
Documentation CD.
For more information on automatic configuration, see the
HP ROM-Based Setup Utility User Guide
on the
Documentation CD or the iLO Management Engine Information Library
(
http://www.hp.com/go/ilomgmtengine/docs
).
Registering the server
To register the server, refer to the HP Registration website (
http://register.hp.com
).