Installing Novell NetWare 6.5
Section 2. Installing Novell NetWare 6.5
Phase 1 - Launching the Novell NetWare 6.5 Installer
1. Turn on the server and insert the
NetWare 6.5 CD 1
.
2. The system will display a text menu.
3. Press
I
to perform new server installation.
4. Press
A
to set installation from the CD-ROM.
5. Press
A
for floppy restore method.
6. Press
A
for run mode to launch the installer.
7. Select the language you want to use for installation.
8. Review the regional setting and modify if necessary, then click
Continue
.
9. Press
F10
twice to accept all license agreements.
10. Change the prompt from Default to Manual, then click
Continue
.
11. Scroll up to select Free space, then press
Enter
.
12. Enter a value for the DOS partition size, then click
Continue
.
It is recommended that the value be not less then 200 MB.
13. Review the server settings and modify themif necessary, then click
Continue
.
The installer would initialize file copying.
14. Click
Continue
after completing the file copy.
Phase 2 - Installing the HP Drivers
The installation program then detects the system hardware and attempts to match the drivers
to the hardware. It displays a Driver names summary screen.
1. If you have an IDE system, press
Enter
to continue.
If you have a SCSI model, you need to install the HP SCSI driver (the SCSI driver
proposed by default by NetWare does not install properly):
a. Scroll down to choose
Modify
and press
Enter
.
b. Scroll down to highlight the
Storage Adapters
item and press
Enter
.
The installation program displays the drivers detected: a SCSI driver and a generic
ATA/IDE/ATAPI Adapter driver (
IDEATA.HAM
).
c. Press
Delete
to remove the default SCSI driver.
The only remaining driver should be the
IDEATA.HAM
driver.
CAUTION:
Do NOT remove the
IDEATA
driver because it is used by the CD-ROM drive.
d. Insert
the
HP disk NW SCSI
diskette you created earlier in the floppy drive.
5-2
HP ProLiant ML110 Server Network Operating System Installation Guide
