Installing Microsoft Windows Server 2003 and Windows Small Business Server 2003
Phase 3 - Adding Terminal Server Services
1. Click
Start | Settings | Control Panel | Add Remove Programs
.
2. Click
Add/Remove Windows Components
.
3. Locate then select the [Terminal Services] checkbox then click
Next
.
4. Select the mode you want to use then click
Next
.
There are two mode options:
Remote administration
mode and
Application server
mode.
NOTE:
The following instructions are based on the
Application server mode
. Please note the licensing
requirement listed on the screen for this mode. Consult with your Microsoft representative for setting the
licensing server.
5. Select the default permissions for application compatibility then click
Next
.
6. Click
Next
to accept the support tools and administrator tools settings.
7. If prompted, insert the
Windows 2003 CD-ROM
.
8. Click
Finish
to close the wizard.
9. Click
Yes
to restart the system.
Be sure to remove the
Windows 2003 CD-ROM
from the drive.
10. After the system reboots, log on to the system.
11. Click
Start | Settings | Control Panel | Administrative Tools
.
12. Check that the following services are now available:
•
•
•
Terminal Services Client Creator
Terminal Services Configuration
Terminal Services Manager
To create Client Installation diskettes:
1. Double-click
Terminal Services Client Creator
.
2. Select the appropriate client type for your environment.
3. Click
Format disk
if needed.
4. Check the number of disks required and label them as
Terminal Services for […] Disk
[x/y]
.
5. Click
OK
to proceed.
6. Follow the on-screen instructions to create the diskettes copies.
7. Click
OK
at the [y] floppies were created… screen.
8. Click
Cancel
to close the
Create Installation Disks
utility.
2-6
HP ProLiant ML110 Server Network Operating System Installation Guide
