Installing Novell NetWare 5.1
7. Wait for about 15 seconds for the CD to be automatically mounted as a volume. After it
is completely mounted the system should say:
“Volume name” mounted successfully.
Note the volume name (example: CSP8_CD1
)
.
8. Type
nwconfig
.
The NetWare Configuration Tool screen displays.
9. Scroll down to select
Product Options
.
10. Scroll up to select
Install a Product Not Listed
.
11. Press
F3
and specify the path, including the volume name.
For example:
CSP8_CD1:\NW51SPx:\
where
CSP8_CD
is the volume name from step 7 and
x
is the version of the Support Pack.
12. Press
F10
to accept the default installation options.
NOTE:
If you want to be able to uninstall the Support Pack later, you must select the option to back up
files.
13. Read the NetWare warnings (recommends avoiding installation during peak hours) and
follow the on-screen instructions.
The system will automatically restart the GUI upon completion of the Support Pack
installation.
Section 4. Installing the PSM4B Patch
1. Insert
the
HP disk PSM4B patch
diskette you created earlier in the floppy drive.
2. Load
NWCONFIG.NLM
to the server that is to be updated.
You can use RCONSOLE.
3. Go to Product Options and select
Install a product not listed
, then press
Enter
.
4. Select the drive. Since you are using the
HP disk PSM4B patch
diskette, press
Enter.
5. Select the proper path containing the INSTALL.ips file.
6. Press
F10
to accept the selection and initialize file copying.
7. Go
to
NCF File Options
and select
Edit Startup.ncf File
, then press
Enter
.
8. Modify
the
startup.ncf
file by entering the command lines below:
; LOAD MPS14.PSM
LOAD ACPIDRV.PSM
9. Save the changes you made.
10. Reboot the system.
HP ProLiant ML110 Server Network Operating System Installation Guide
3-5
