Diagnostics tools 91
To change the admin password:
1.
In the
Security
menu screen, select the
Admin Password
field, and then press
Enter
.
2.
Type the original password in the password box.
3.
Type a new password, and then press
Enter
.
4.
Retype the new password to verify the first entry, and then press
Enter
again.
5.
Press
F10
to save the password and close the Setup Utility.
To remove the admin password:
1.
In the
Security
menu screen, select the
Admin Password
field, and then press
Enter
.
2.
Type the original password then press
Enter
.
3.
Press
Enter
twice without entering anything in the new and confirm password fields.
4.
Press
F10
to save the changes you made and close the Setup Utility.
The
Admin Password Is
field value is set to
Clear
.
To reset the admin password:
If you forget the admin password, use switch 8 of the system configuration switch (PCHSW1) to reset
it. See
page 103
for the location of this switch.
1.
Perform the pre-installation procedure.
2.
Locate the PCHSW1 switch on the system board.
If necessary, remove any assemblies or cables that prevent access to the PCHSW1 switch.
3.
Flip switch 8 to the
On
position for about 3 seconds.
4.
Flip switch 8 back to the default
Off
position.
5.
Perform the post-installation procedure.
6.
During POST, press
F10
to access the Setup Utility.
7.
Press
F9
to load the system default values.
8.
Press
F10
to save the changes you made and close the Setup Utility.
Summary of Contents for ProLiant ML110 G6
