HP ProLiant ML110 G6, Maintenance And Service Manual

Page: 74 / 115

Diagnostics tools 74
Boot Features submenu
Field Description Options
Embedded VGA Control Select the status of the embedded graphics controller when an
external VGA card is installed.
•
Auto Detect – Disable the embedded graphics controller
when an external VGA card is installed.
•
Always Enabled – The embedded graphics controller remains
the primary controller even if an external VGA card is
installed.
Auto Detect
Always Enabled
Splash Screen Enable this option to display the splash screen prior to loading
the operating system. Disabling this option speeds up the boot
process
Enabled
Disabled
NumLock Select the NumLock state when the server is powered on.
•
Enabled – NumLock is on.
•
Disabled – NumLock is off.
•
Auto – The NumLock state will be the same as it was when
the server was last powered off.
Enabled
Disabled
Auto
POST F1 Prompt Select what action to take when a POST error occurs during
bootup.
•
Delayed – The system pauses for about 5 seconds and then
continues booting up.
•
Enabled – The system pauses and will only continue booting
up when the
F1 key is pressed.
•
Disabled – The system ignores any POST errors during
bootup.
Delayed
Enabled
Disabled
Restore After AC Power
Loss Select the power state when an AC power loss occurs.
•
•
Last State – The server reverts to the last power state before
Off – The server remains off until the power button is pressed.
the power loss occurred.
•
On – The server switches back on after the AC power loss.
Off
Last State
On
Splash Screen Enable this option to display the splash screen during bootup. Enabled
Disabled