HP ProLiant EC200a, User Manual, Page: 40 / 73

Hardware options installation 40
5.
Align the rear screw holes of the RJ-45 port bracket to the middle frame, and then install the screws
according to the numbering indicated on the bracket.
6.
Install the communication board screws.
Prepare the server for setup
1.
Install the access panel (on page 19 ).
2.
If the server was removed from the cradle, wall mount, or storage expansion unit, do one of the
following:
o
Install the server in the cradle (on page 23 ).
o
Install the server in the wall mount (on page 32 ).
o
Install the server on the storage expansion unit (on page 35 ).
Servers attached to storage expansion units must be positioned adjacent to each other, and not
on top of each other.
3.
If removed, install the Kensington security lock.
For more information, see the Kensington security lock documentation.