HP ProLiant EC200a, User Manual, Page: 33 / 73

Hardware options installation 33
b.
Route the power and adapter cords through the top opening of the wall mount, with the adapter
cord grommet extended out of the opening.
3.
For cable management purposes, secure the extra length of the adapter cord that is not extended
out of the wall mount inside the wall mount.
4.
Depending on how far the power source is from the wall mount, store the extra length of the power
cord inside the wall mount.
5.
Install the server in the wall mount:
a.
Orient the server in a vertical position with the rear panel parallel to the retention latch.
b.
Insert the two hooks on the bottom side of the wall mount into the corresponding openings on the
server.
c.
Align and insert the two posts on the wall mount into the corresponding openings on the server.
d.
To ensure that the retention latch fully engages with the server, push the back edge of the server
against the wall mount.
—
Installing the server in the wall mount when the power source location is lower than the wall
mount.